Return & Exchange Policy


If you are not satisfied with your order, please return it in its original condition within 30 days for exchange or refund

Customers are responsible for return shipping charges

Shipping and handling charges are nonrefundable. 20% restocking fee will be charged

If the part is received in defective or damaged condition, please return immediately. We’ll send you replacement ASAP

We always stand behind all products we sell. Your satisfaction is our primary concern

If you have any questions or issues, please feel free to contact us via email. We will try our best to resolve any problem(s)

Backrest Instructions






Your hardware kit includes the following:

1. 4 mm x 9 inch hex wrench

2. 6 - 6 mm bolts (Short)

3. 2 - 6 mm nylon locking nuts

4. 4 - 6 mm bolts (Long)

  1. 1.4 - Washers

  2. 2.6. 4 - Aluminum Spacers

7. 2 - Quick Release Pins








Step 1.

a. Remove the four existing perimeter bolts on

your plastic cargo rack.

b. Leave the two bolts directly behind the tool

carrier

c. Discard the factory bolts

d. Leave the factory pressed in aluminum spacers

on the factory cargo rack.

e. Install 4 new spacers provided












Step 2.

a. Install new aluminum Cargo Rack

b. Align holes

c. Install 4 - Long 6 mm bolt and Washers

d. Thread bolts but do not tighten










Step 3.

a. Install sliders to the back rest plate.

b. Notice sliders are mounted inside the angle back

plate

c. Use 2 - 6 mm short bolts and 2 - nylon locking

nuts

d. Tighten bolts to allow the back rest to tilt forward

and back.











Step 4.

a. Install backrest and slider into place
















Step 5.

a. Tighten slider using 4 - 6 mm bolts

b. WARNING...DO NOT OVER TIGHTEN

ALUMINUM THREADS!

c. For solo rider adjust cargo rack to the forward

position, using less slider






Step
6.

a. Install quick release pins. Start at the middle

setting. (this is the most popular setting)

b. At this point its time to fit the back rest to your desired comfort.

c. Tighten cargo rack bolts

ENJOY!







We hope you enjoy your new backrest by klrdash. If you have any questions or comments please feel free to contact us at klrdash@hotmail.com

 

HOURS ARE 9:00 AM TO 6:00 PM MOUNTAIN STANDARD TIME

MONDAY THRU FRIDAY

PHONE: 1-435-229-5935

ALL RIGHTS RESERVED / KLRDASH.COM

CONTACT US AT KLRDASH@HOTMAIL.COM

Privacy StatementPRIVACY_STATEMENT.html
Terms Of UseTERMS_OF_USE.html

KLRDASH™

Contact Us

KLRDASH INSTRUCTIONS

KLRDASH INSTALLATION VIDEO

Thank you to Tyler from Everide for a great installation video.

Check out his web page for great reviews and all around dual sport tips and tricks.